G6 V6-3.5L VIN 8 (2005)
4. Install the crankshaft rear oil seal to the crankshaft.
5. Tighten the wing nut on the J34686 until it bottoms.
6. Remove the J34686 from the crankshaft.
7. Install the engine flywheel.
4. Install the crankshaft rear oil seal to the crankshaft.
5. Tighten the wing nut on the J34686 until it bottoms.
6. Remove the J34686 from the crankshaft.
7. Install the engine flywheel.