G6 V6-3.5L VIN 8 (2005)
Alignment: Technical Service Bulletins
Steering/Suspension - Revised Camber Specifications
SMU - Revised Front Camber and Front Camber Cross Tolerance Specifications # 05-03-07-002 - (Mar 21, 2005)
Revised Front Camber and Front Camber Cross Tolerance Specifications
Models:
2005 Pontiac G6
This bulletin is being issued to revise the front camber and front camber cross tolerance specifications in the Wheel Alignment sub-section of the Service
Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.
Warranty Information
Disclaimer
