G6 V6-3.5L VIN 8 (2005)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis
FUEL HOSE/PIPES REPLACEMENT - CHASSIS
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Remove the pipe retaining clip from the fuel feed pipe (1).
3. Raise the vehicle. Refer to Vehicle Lifting.
4. Disconnect the fuel feed pipe from the engine fuel rail.
5. Cap or plug the fuel pipe and the engine fuel rail to prevent contamination.
6. Remove the rear brake pipe bracket retaining nuts and release the brackets from the body studs.
7. Release the pipe retainers (1) from the vehicle underbody.
8. Remove the fuel feed pipe from the pipe retainers.
9. Lower the rear of the pipe while moving the pipe rearward slightly, then lower the front of the pipe.
10. Remove the fuel feed pipe from the vehicle.
INSTALLATION PROCEDURE
1. Position the fuel feed pipe to the vehicle.
2. With the rear of the pipe positioned slightly rearward and down, raise the front of the pipe into position.
3. Install the remainder of the pipe into position.
4. Install the fuel feed pipe to the pipe retainers.
5. Secure the pipe retainers (1) to the vehicle underbody.
