G6 V6-3.5L VIN 8 (2005)
2. Route the steering column wiring through the steering wheel.
3. Install the steering wheel.
4. Connect the steering wheel control electrical connector (1).
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the steering wheel nut.
^
Tighten the nut to 32 Nm (24 ft. lbs.).
6. Install the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in Restraint Systems.
7. Install the upper steering column trim cover.
8. Enable the Restraints system. Refer to Restraint Systems Disabling and Enabling Zone 3 in Restraint Systems.
