G6 V6-3.6L (2007)
Rear Bumper Reinforcement: Service and Repair
Rear Energy Absorber Replacement
Rear Energy Absorber Replacement
Removal Procedure
1. Remove the rear bumper fascia.
2. Remove the push in retainers from the lower rear fascia energy absorbers.
3. Remove the energy absorbers from the rear bumper fascia, by pulling downward.
4. Remove the energy absorber from the rear bumper fascia.
Installation Procedure
1. Position the energy absorber to the rear bumper fascia.
Align the tab on the energy absorber with the hole in the fascia, located in the center by the license plate pocket.