G6 V6-3.6L (2007)
13. Remove the 2 brake caliper pin bolts.
14. Remove the park brake cable from the caliper.
15. Remove the brake caliper from the brake caliper bracket.
Installation Procedure
1. Inspect the caliper slide boots for cuts, tears, or deterioration. If damaged, replace the slides and boots. Refer to Rear Disc Brake Hardware
Replacement .
2. Install the brake caliper to the brake caliper bracket.
Notice: Refer to Fastener Notice .
3. Install the 2 brake caliper pin bolts.
Tighten the brake caliper pin bolts to 35 N.m (26 lb ft).