G6 V6-3.6L (2007)
Cooling System Air Bleeder Pipe / Hose: Service and Repair
Coolant Air Bleed Pipe Assembly Replacement
Removal Procedure
1. Remove the intake manifold cover.
2. Remove the surge tank inlet hose.
3. Remove the fuel feed pipe line nut (2).
4. Remove the fuel feed line clip from the stud and reposition the fuel feed line.
5. Remove the coolant air bleed hose/pipe bolt (3) from the upper intake manifold.
6. Reposition the coolant air bleed hose clamp (2) at the water outlet.
7. Remove the coolant air bleed hose from the water outlet.
8. Remove the coolant air bleed hose/pipe from the engine.