pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Compression Check > < Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake|Page 4092

G6 V6-3.6L (2007)

Page 2
background image

1.  Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
2.  Install the CMP actuator solenoid valve.

Notice: Refer to Fastener Notice.

3.  Install the CMP actuator solenoid valve bolt.

Tighten the bolt to 10 Nm (89 lb in).

4.  Connect the engine wiring harness electrical connector (4) to the bank 2 exhaust CMP actuator solenoid valve.
5.  Install the engine mount strut bracket.
6.  Install the air cleaner assembly.

Compression Check > < Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake|Page 4092