G6 V6-3.6L (2007)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Turn the ignition OFF.
2. Remove the oil level indicator from the oil level indicator tube.
3. Remove the oil level indicator tube bolt.
4. Remove the oil level indicator tube up through the exhaust manifold.
5. If you are replacing only the oil level indicator tube seal, remove and discard the old seal.
Installation Procedure
1. Install a new seal on the oil level indicator tube.
2. Install the oil level indicator tube.