G6 V6-3.6L (2007)
Oil Pan: Service and Repair
Oil Pan Replacement
Tools Required
EN 46109 Guide Pin Set
J 39505 Torque Wrench Adapter
Removal Procedure
1. Disconnect the battery negative cable.
2. Install the engine support fixture.
3. Remove the right side engine mount.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
5. Drain the engine oil and remove the oil filter. Refer to Engine Oil and Oil Filter Replacement .
6. Remove the catalytic converter.
7. Remove the air conditioning (A/C) compressor.
8. Remove the oil pan bolts.
9. Remove the oil pan.
10. Clean the oil pan and the engine block gasket surface. Refer to Oil Pan Cleaning and Inspection .
Installation Procedure
