Pontiac Workshop Service and Repair Manuals > G6 V6-3.6L (2007) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Solenoid | Component Information | Service and Repair | Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake

Page 2

1. Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
2. Install the CMP actuator solenoid valve.

Notice: Refer to Fastener Notice.

3. Install the CMP actuator solenoid valve bolt.

Tighten the bolt to 10 Nm (89 lb in).

4. Connect the engine wiring harness electrical connector (5) to the bank 1 exhaust CMP actuator solenoid valve.
5. Install the air cleaner assembly.

Pontiac Workshop Service and Repair Manuals