G6 V6-3.6L (2007)
1. Ensure that the spark plug gap is equivalent to the spark plug gap specification. Refer to Ignition System Specifications.
Notice: Be sure that the spark plug threads smoothly into the cylinder head and the spark plug is fully seated. Use a thread chaser, if necessary, to
clean threads in the cylinder head. Cross-threading or failing to fully seat the spark plug can cause overheating of the plug, exhaust blow-by, or
thread damage.
Notice: Refer to Fastener Notice.
2. Install the spark plug.
Tighten the spark plug to 20 N.m (15 lb ft).
3. Install the ignition coil(s).
