G6 V6-3.6L (2007)
21. Push upward on the radiator and downward on the condenser to unsnap the condenser mounting tabs from the radiator clip.
22. Remove the condenser.
23. Remove the upper seal.
Important: Cap all A/C components immediately to prevent system contamination.
24. Remove and discard the sealing washers.
Installation Procedure
1. Uncap A/C components.
2. Install new sealing washers.
3. Install the upper seal.
4. If replacing the condenser, add the specific amount of PAG(R) oil directly to the condenser. Refer to Refrigerant System Capacities.
5. Install the radiator air side seals onto the condenser mounting tabs on the radiator.
