G6 V6-3.6L (2007)
2. Install the HVAC control module.
Notice: Refer to Fastener Notice.
3. Tighten the HVAC control module screws.
Tighten the screws to 2.5 N.m (22 lb in).
4. Install the I/P center trim panel.
5. Calibrate the actuator. Refer to Actuators Recalibration. See: Testing and Inspection/Programming and Relearning
6. Refer to Programming and Relearning. See: Testing and Inspection/Programming and Relearning.
