G6 V6-3.6L (2007)
7. Position the headlamp assembly to the vehicle. Press the headlamp downward to engage the locating tabs to the front edge of the fender.
8. NOTE: Refer to Fastener Notice.
Install the bolts to the headlamp assembly.
Tighten the bolts to 2 N.m (18 lb in).
9. Install the push-in-retainers across the front fascia.
10. Close the hood.
11. Inspect the headlamp alignment. Adjust the headlamp alignment, if necessary. Refer to Headlamp Aiming.
