pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Power Steering Reservoir Inlet Pipe/Hose Replacement (LY7, Power Steering Pump to Reservoir)|Page 14573 > < Steering - Whine or Grind Noise in Engine Compartment|Page 14570

G6 V6-3.6L (2007)

Page 1
background image

Power Steering Line/Hose: Service and Repair
Power Steering Reservoir Inlet Pipe/Hose Replacement (LY7, Power Steering Pump to Reservoir)

Power Steering Reservoir Inlet Pipe/Hose Replacement (LY7, Power Steering Pump to Reservoir)

Removal Procedure

1. Compress the clamp (1) and disconnect the power steering reservoir inlet hose (2) from the power steering fluid reservoir (3).
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the RH front tire and wheel assembly. 

4. Compress the clamp (1) and disconnect the power steering reservoir inlet hose (2) from the power steering pump (3).
5. Remove the power steering reservoir inlet hose from the vehicle.

Installation Procedure

Power Steering Reservoir Inlet Pipe/Hose Replacement (LY7, Power Steering Pump to Reservoir)|Page 14573 > < Steering - Whine or Grind Noise in Engine Compartment|Page 14570