G6 V6-3.6L (2007)
Steering Gear: Service and Repair
Steering Gear Cylinder Pipe Assembly and Seals Replacement - Off Vehicle
Steering Gear Cylinder Pipe Assembly and Seals Replacement - Off Vehicle (Hydraulic Power Steering (HPS))
Removal Procedure
Important: Protect the boots from sharp tools and from the sharp edges of surrounding components.
1. Remove the fastener (1) from the cylinder line retaining plate (2) at the valve end.
2. Remove the cylinder line retaining plate (2).
3. Loosen both cylinder line nuts (3) on cylinder end of the gear assembly (1).
4. Remove both cylinder line assemblies (2) from the rack and pinion gear assembly (1).
5. Remove and discard the O-rings seals (4) from the valve end (5).
Installation Procedure
1. Inspect the cylinder lines (1) for the following items:
^
Cracks
^
Dents
^
Damage to the threads
2. Replace the parts as needed.
3. Lubricate and install the O-rings seals (2) onto the cylinder lines (1).