G6 V6-3.6L (2007)
Fluid Cooler Pipe Seal Replacement
Fluid Cooler Pipe Seal Replacement
Tools Required
^
J 45201 Cooler Line Seal Remover
^
J 41239 Cooler Line Seal Remover/Installer
Removal Procedure
Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a
hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.
1. Position the vehicle on a hoist.
2. Place a drain pan or suitable container under the vehicle.
3. Raise the vehicle.
4. Remove the transaxle oil cooler line assembly nut from the transaxle.
Notice: Avoid spinning the seal in the case bore. Damage to the case bore may result.
5. Remove the transaxle oil cooler lines from the transaxle.
