G6 V6-3.6L (2007)
Notice: Refer to Fastener Notice.
Important: The correct thread engagement is critical. Cross-threaded fittings can achieve proper tightness and still leak.
1. Install the oil cooler fittings (28, 29) to the transaxle.
Tighten the fittings to 38 N.m (28 lb ft).
2. Install the oil cooler hoses to the transaxle oil cooler fittings. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Replacement.
3. Lower the vehicle.
Notice: Refer to Transmission Overfill Notice.
4. Adjust the fluid level.
5. Inspect for fluid leaks. Refer to Fluid Leak Diagnosis.
6. Remove the drain pan from under the vehicle.
Transmission Fluid Cooler Inlet Hose Replacement
Transmission Fluid Cooler Inlet Hose Replacement
