G6 V6-3.6L (2007)
3. Install the transaxle shift control cable to the transaxle control lever base. Insure the cable retainer (2) is fully secured to the transaxle control lever
base.
4. Connect the transaxle shift control cable terminal (1) to the shift lever pin.
5. Install the console.
6. Install the transaxle range selector cable into the bracket.
7. Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.
8. Install the retainer to the transaxle range selector cable.
9. Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment.
