G6 V6-3.6L (2007)
Automatic Transmission Control Replacement
Removal Procedure
Important: All shift cable and park lock cable clips are one time usage only. Any service repair requiring cables to be disconnected from
the transaxle control cable bracket or shift assembly will require a cable clip replacement.
1. Remove the console.
2. Disconnect the shift cable (2) from the control assembly pin.
3. Remove the shift cable retainer clip and remove the cable (1) from the control assembly.
4. Disconnect the park lock cable assembly (2) from the pin on the control assembly.
5. Depress the tab on the park lock cable and remove the cable (1) from the control assembly. Discard the park lock cable clip.
