G6 V6-3.6L (2007)
Notice: Refer to Fastener Notice.
5. Install the oil pump bolts (206, 207).
^
Tighten the bolts (207) to 12 N.m (106 lb in).
^
Tighten the bolts (206) to 16 N.m (12 lb ft).
6. Reposition and connect the electrical connectors to the following:
^
Automatic transaxle fluid pressure manual valve position switch assembly (395)
^
2-3 shift solenoid valve assembly (315B)
^
Internal mode switch (IMS)
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The engine control module (ECM),
powertrain control module (PCM) or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions.
7. Install the case side cover. Refer to Case Side Cover Replacement.
