G6 V6-3.9L (2009)
Front Bumper Bracket: Service and Repair
Front Bumper Impact Bar Replacement
Front Bumper Impact Bar Replacement
Removal Procedure
Warning: Refer to Approved Equipment for Collision Repair Warning (See: Service Precautions/Technician Safety Information/Approved
Equipment for Collision Repair Warning).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming
and Disarming/Service and Repair).
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
Note: This panel is replaced at factory welds
3. Remove all related panels and components.
4. Repair as much of the damage as possible. Refer to Dimensions - Body (Convertible) ()Dimensions - Body (Coupe) ()Dimensions - Body
(Sedan) ().
5. Remove the sealers and anti-corrosion materials from the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair ().
Note: Note the number and location of the factory welds for installation of the front impact bar.
