G6 V6-3.9L (2009)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement
Removal Procedure
1. Remove the knee bolster. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
2. Remove the closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
3. Remove the electrical connector from the brake apply sensor.
4. Remove the steering column assembly from the vehicle. Refer to Steering Column Replacement (Electronic Power Steering) (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Steering Column Replacement (Electronic Power Steering))Steering Column
Replacement (Hydraulic Power Steering) (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column
Replacement (Hydraulic Power Steering)).
5. Disconnect the brake pedal pushrod retaining clip (1) the wave washers (2) and the brake booster pushrod (3) from the brake pedal pin (4).