G6 V6-3.9L (2009)
4. Remove the brake pads (1) from the brake caliper bracket.
5. Remove the brake pad retainers (2) from the brake caliper bracket (3).
6. Remove the brake caliper bracket bolts (2).
7. Remove the rear brake caliper bracket.
8. Inspect the brake mounting and hardware. Refer to Rear Disc Brake Hardware Replacement (See: Disc Brake System/Service and Repair/Rear
Disc Brake Hardware Replacement).
9. Inspect the brake caliper bracket.
10. Replace the brake caliper bracket if cracked or damaged.
Installation Procedure
1. Install the brake caliper bracket.
Caution: This is a self-retaining fastener joint that does not require thread locking compounds. Do not attempt to clean the threads with a
standard tap. If a standard tap is used, damage to the joint threads will occur.