G6 V6-3.9L (2009)
Special Tools
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the coolant. Refer to Cooling System Draining and Filling (LY7, LZE, LZ4, LZ9) (See: Service and Repair)Cooling System Draining and
Filling (GE 47716 Fill) (See: Service and Repair)Cooling System Draining and Filling (LE5 Static Fill) (See: Service and Repair).
2. Loop a rope around each of the upper 2 tabs of the condenser and tie the rope around the upper tie bar.
3. Remove the upper radiator support brackets. Refer to Radiator Support Bracket Replacement (See: ).
4. Reposition the radiator inlet hose clamp at the radiator using the J 38185 .
5. Remove the radiator inlet hose from the radiator.
6. Remove the front air dam. Refer to Front Air Dam Replacement (GXP) (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair/Front Air Dam Replacement (GXP))Front Air Dam Replacement (G6) (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air