G6 V6-3.9L (2009)
Camshaft: Service and Repair
Camshaft Rear Bearing Hole Plug Replacement
Removal Procedure
1. Remove the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
2. Remove the camshaft rear bearing hole plug.
Installation Procedure
1. Coat the camshaft rear bearing hole plug with sealer. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers).
2. Install the camshaft rear bearing hole plug.