G6 V6-3.9L (2009)
1. Place the engine mount into position on the engine compartment side rail.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the engine mount bolts.
Tighten the bolts to 50 Nm (37 lb ft).
3. Install the engine mount to engine mount bracket nuts.
Tighten the nuts to 50 Nm (37 lb ft).
4. Remove the floor jack and block of wood from under the oil pan.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).
