G6 V6-3.9L (2009)
1. Lubricate the oil level indicator tube O-ring seal with clean engine oil.
2. Install the oil level indicator tube into the engine block.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the oil level indicator tube bracket bolt.
Tighten the bolt to 25 Nm (18 lb ft).
4. Install the oil level indicator.
5. Install the HO2S clip (3) to the fill tube bracket.
6. Install the spark plug wire to the number 6 cylinder spark plug.