G6 V6-3.9L (2009)
2. Position the oil filter adapter and gasket to the engine.
3. Apply threadlock to the bolt/stud threads, if required. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) for the correct part number.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the oil filter adapter bolts and stud.
Tighten the bolts and stud to 25 Nm (18 lb ft).
5. Install the oil filter.
Tighten the filter to 30 Nm (22 lb ft).