G6 V6-3.9L (2009)
5. Inspect the throttle body seal for damage, replace as necessary.
6. Apply threadlock to the throttle body bolts/studs threads. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives,
Fluids, Lubricants, and Sealers) for the correct part number.
7. Install the throttle body and bolts/studs.
Tighten the bolts/studs to 10 Nm (89 lb in).
8. Install the inlet manifold tuning valve, and bolts.
Tighten the bolts to 10 Nm (89 lb in).
9. Install the NEW upper to lower intake manifold gaskets.
