G6 V6-3.9L (2009)
3. Remove the air temperature actuator screws.
4. Remove the air temperature actuator.
5. Disconnect the air temperature actuator electrical connector.
Installation Procedure
1. Connect the air temperature actuator electrical connector.
2. Install the air temperature actuator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the air temperature actuator screws.
Tighten the screws to 1.5 Nm (13 lb in).
4. Close the I/P compartment door. Refer to Instrument Panel Compartment Replacement (See: Body and Frame/Interior Moulding / Trim/Glove
