G6 V6-3.9L (2009)
19. Remove and discard the condenser mounting bolts.
20. Remove and discard the condenser mounting nuts.
21. Push upward on the radiator and downward on the condenser to unsnap the condenser mounting tabs from the radiator clip.
22. Remove the condenser.
23. Remove the upper seal.
Note: Cap all A/C components immediately to prevent system contamination.
24. Remove and discard the sealing washers.
Installation Procedure
1. Uncap A/C components.
2. Install new sealing washers. Refer to Sealing Washer Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/Sealing Washer
Replacement).
3. Install the upper seal.
