G6 V6-3.9L (2009)
Caution: Avoid damaging the lock ring. Use only J-45722 to prevent damage to the lock ring.
Caution: Do Not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage
the joints.
Note: Do NOT use impact tools. Significant force will be required to release the lock ring. The use of a hammer and screwdriver is not
recommended. Secure the fuel tank in order to prevent fuel tank rotation.
5. Use the J 45722 and a long breaker-bar in order to unlock the fuel sender lock ring.
Note:
*
The fuel sender assembly may spring up from its position.
*
When removing the fuel sender assembly from the fuel tank, be aware that the reservoir bucket is full of fuel. It must be tipped slightly during
removal to avoid damage to the float. Discard the fuel sender assembly O-ring and replace it with a new one.
*
Carefully discard the fuel in the reservoir bucket into an approved container.
6. Raise the fuel sender assembly out of the tank far enough to access the vapor line quick connect fitting (1) on the underside of the sender cover.
