G6 V6-3.9L (2009)
7. Position the headlamp assembly to the vehicle.
Press the headlamp downward to engage the locating tabs to the front edge of the fender.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Install the bolts to the headlamp assembly.
Tighten the bolts to 2 Nm (18 lb in).
9. Install the push-in-retainers across the front fascia.
10. Close the hood.
11. Inspect the headlamp alignment. Adjust the headlamp alignment, if necessary. Refer to Headlamp Aiming (See: Headlamp/Adjustments).
