G6 V6-3.9L (2009)
Air Filter Element: Service and Repair
Air Cleaner Element Replacement
Removal Procedure
1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor harness connector.
2. Remove the upper air cleaner cover screws.
3. Remove the upper air cleaner cover.
4. Remove the air cleaner filter from the lower air cleaner housing.
5. Inspect the air cleaner filter for dust, dirt and water contamination.
6. Replace as necessary. Refer to Maintenance Schedule (North American Emissions) (See: Service Intervals).
Installation Procedure