G6 V6-3.9L (2009)
19. Remove the liquid line.
Note: Cap all A/C components immediately to prevent system contamination.
20. Remove and discard the sealing washers.
Installation Procedure
1. Uncap A/C components.
2. Install new sealing washers. Refer to Sealing Washer Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Sealing Washer Replacement).
3. Install the liquid line.
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair).
