G6 V6-3.9L (2009)
Fuse Block: Service and Repair
Underhood Electrical Center or Junction Block Replacement
Underhood Electrical Center or Junction Block Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the fasteners retaining the positive battery cable leads to the underhood junction block, then reposition the cable lead away from the
junction block.
3. Remove the relay cover.
4. Remove all of the fuses and the relays.