G6 V6-3.9L (2009)
7. Disconnect the vapor line quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air
Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
8. Remove the fuel sender assembly (2) from the fuel tank.
Installation Procedure
1. Install a NEW O-ring seal (3) onto the fuel sender.
2. Install the fuel sender assembly (2) into the fuel tank far enough to connect the vapor line quick connect fitting on the underside of the sender
cover.