G6 V6-3.9L (2009)
12. Install the exhaust manifold heat shield.
13. Install the exhaust manifold heat shield bolts.
Tighten the bolts to 10 Nm (89 lb in).
14. Connect the engine harness electrical connector (4) to the HO2S.
15. Install the CPA retainer (5).
16. Install the HO2S clip (3) to the oil level indicator tube bracket.
17. Perform the engine mount position adjustment procedure. Refer to Engine Mount Position Adjustment (See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Adjustments).
18. Start the engine, and check for exhaust leaks.
