G6 V6-3.9L (2009)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis
Evaporative Emission Hoses/Pipes Replacement - Engine/Chassis
Special Tools
J 45059 Angle Meter
Removal Procedure
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) (See: Fuel Delivery and Air Induction/Fuel Filter/Fuel
Pressure Release/Service and Repair/Fuel Pressure Relief (Without CH 48027))Fuel Pressure Relief (With CH 48027) (See: Fuel Delivery and
Air Induction/Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (With CH 48027)).
2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair).
3. Disconnect the evaporative emission (EVAP) pipe (1) quick connect fitting from the purge solenoid. Refer to Plastic Collar Quick Connect Fitting
Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
