G6 V6-3.9L (2009)
Caution: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector
nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning
method.
9. Remove the fuel injector retaining clip (1), if required.
10. Remove the fuel injector (3) from the fuel rail, if required.
11. Remove and discard the fuel injector upper O-ring (2).
Installation Procedure
Note: DO NOT reuse the fuel injector O-ring seals. Install NEW O-ring seals during assembly.
Note: Ensure to use the correct part number when ordering the replacement fuel injectors.
1. The fuel injector (1) is stamped with a part number identification (2).
2. Lubricate the NEW injector O-rings (2) with clean engine oil.
3. Install the NEW fuel injector upper O-ring (2).
4. Install the fuel injector (3) to the fuel rail, if required.
5. Install the fuel injector retaining clip (1), if required.