G6 V6-3.9L (2009)
Fuel Gauge Sender: Service and Repair
Fuel Tank Module Replacement
Special Tools
J 45722 Fuel Sender Lock Ring Wrench
Removal Procedure
Warning
In order to reduce the risk of fire and personal injury that may result from a fuel leak, always replace the fuel sender gasket when reinstalling the fuel
sender assembly.
1. Remove the fuel tank. Refer to Fuel Tank Replacement (See: Service and Repair).
2. Disconnect the fuel pressure sensor and sender electrical connections.
3. Disconnect the EVAP vapor line quick connect fittings (1, 2). Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
4. Disengage the fuel feed line from the retaining features built into the fuel tank.
