G6 V6-3.9L (2009)
1. Install the TCC solenoid (315).
2. Install the TCC solenoid retaining clip (314).
3. Connect the TCC solenoid electrical connector.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to
Transmission Adaptive Functions (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/4T65-E -
Automatic Transmission/Transmission Adaptive Functions).
4. Install the case side cover. Refer to Control Valve Body Cover Replacement (See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Valve Body/Service and Repair/4T65-E - Automatic Transmission/Control Valve Body Cover Replacement).