G6 V6-3.9L (2009)
Body Control Module: Service and Repair
Body Control Module Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Remove the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side (See: Body and Frame/Interior
Moulding / Trim/Console/Service and Repair).
3. Remove the body control module (BCM) screws.
4. Remove the BCM wire harness connectors.
5. Remove the BCM.
Installation Procedure