pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Seat Occupant Sensor > < Inflatable Restraint Front End Sensor Replacement|Page 10537
Page 2
background image

1. Connect the electrical connector.

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

2. Position the sensor to the vehicle and install the sensor fasteners.

Tighten the fasteners to 9 Nm (80 lb in).

3. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (Driver)   (See: Body and Frame/Doors, Hood and

Trunk/Doors/Front Door/Front Door Panel/Service and Repair)Front Side Door Trim Panel Replacement (Passenger)   (See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair).

4. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling   (See: Air Bag(s) Arming and Disarming/Service and Repair).

Seat Occupant Sensor > < Inflatable Restraint Front End Sensor Replacement|Page 10537