G6 V6-3.9L (2009)
Important: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.
1. Install the battery current sensor (1) by passing the ground ends of the negative battery cable through the sensor.
2. Measure from the same end as earlier, and slide the current sensor to that measurement on the negative battery cable.
3. Install the battery negative cable. Refer to Battery Negative Cable Replacement (With LY7) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Replacement (With LE5) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Replacement (LZ9) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Replacement (LZ4) (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair).