G6 V6-3.9L (2009)
7. Turn the lock ring until the ring seats on the second detent.
8. Engage the fuel feed line to the retaining features built into the fuel tank.
9. Connect the EVAP vapor line quick connect fittings (1, 2). Refer to Plastic Collar Quick Connect Fitting Service (See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
10. Connect the fuel pressure sensor and sender electrical connections.
11. Install the fuel tank. Refer to Fuel Tank Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair).
12. Lower the vehicle.
13. Refill the tank.
14. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Service and Repair).
15. Inspect for fuel leaks through the following steps:
1. Turn the ignition to the ON position for 2 seconds
2. Turn the ignition to the OFF position for 10 seconds.
3. Turn the ignition to the ON position
4. Check for fuel leaks.
