G6 V6-3.9L (2009)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Bank 2 Sensor 2
Heated Oxygen Sensor Replacement - Bank 2 Sensor 2
Special Tools
J 39194-B Heated Oxygen Sensor Wrench
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the connector position assurance (CPA) retainer (1).
3. Disconnect the heated oxygen sensor (HO2S) electrical connector (2).
Note: The HO2S may be difficult to remove when the engine temperature is less than 48°C (120°F). Excessive force may damage the threads in
