G6 V6-3.9L (2009)
Negative: Service and Repair
Battery Negative Cable Replacement (LZ9) (3.9L)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).
2. Remove the negative cable ground terminal nut at the tie bar (1).
3. Remove the negative battery cable clip (3) from the battery tray.
4. Remove the tape holding the positive cable to the negative cable.
5. Remove the negative cable from the retainers.
6. Remove the battery cable/ground cable lead nut (2) from the transmission stud.
7. Remove the engine harness and negative battery cable leads.
8. Remove the ground cable.
